If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’

1. SET UP

When inserting the batteries make sure they are the correct way round

2. BASICS

     

The monitor will automatically be in ‘SCAN’ mode

To come out of ‘SCAN’ mode press the single button on the monitor until the small arrow aligns with your chosen setting

3. TROUBLESHOOT

If your monitor is not displaying any readings some things to check are;

1. The wires connected during assembly are securely clipped together

2. The pins at the end of the wires are not bent in any way

3. None of the wires have been trapped in the post

4. The pulse wire is fully inserted into the back of the monitor

*Please note the distance will only measure in miles and not kilometres*