If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’
1. SET UP
When inserting the batteries make sure they are the correct way round
2. BASICS
The monitor will automatically be in ‘SCAN’ mode
To exit ‘SCAN’ mode press the single button on the monitor, continuously press the button until the arrow aligns with your chosen setting
To reset the monitor press and hold the single button until all of the zero’s flash
3. TROUBLESHOOT
If your monitor is not displaying any readings some things to check are;
1. The wires connected during assembly are securely clipped together
2. The pins at the end of the wires are nit bent in any way
*Please note the distance will only measure in miles and not kilometres*