If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’

1. SET UP

When inserting the batteries loosen the screws, slide the monitor up and pull the clip

2. BASICS

          

The monitor will automatically be in ‘SCAN’ mode

Press ‘MODE’ to exit scan mode and continuously press until your chosen setting flashes

When your setting flashes then press ‘SET’ three times and the digits will start to increase

Press ‘RESET’ to return the digits to zero

3. TROUBLESHOOT

If your monitor is not displaying any readings some things to check are;

1. The wires connected during assembly are securely clipped together

2. The pins at the end of the wires are not bent in any way