If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’

1. SET UP

When inserting the batteries make sure they are the correct way round

2. BASICS

          

The monitor will automatically be in ‘SCAN’ mode

Press ‘MODE’ to exit the scan mode and continuously press until your chosen setting is displayed

Press ‘SET’ to increase the digits to your desired distance/time etc.

Press ‘RESET’ to return all the digits to zero

3. TROUBLESHOOT

If your monitor is not displaying any readings some things to check are;

1. The wires connected during assembly are securely clipped together

2. The pins at the end of the wires are not bent in any way

3. The wires are not caught in the frame