If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’

TOOLS

         

 

1 x Multi Tool                                 1 x Multi Tool Spanner                       1 x Crank Removal Tool

 

INSTRUCTIONS

1. Start by removing the left side bolt securing the swing arm

2. Remove the left rear stabiliser bolt

3. Remove all the screws from the left side

4. Once the casing is off remove the cap from the centre of the flywheel

5. Using the crank removal tool insert the silver end

6. Turn the tool anticlockwise

7. Insert the black end and turn clockwise

8. Remove the left side wheel

9. Push up the magnets and screw the bottom nut clockwise down the thread

10. Now screw the top nut clockwise down the thread

ADVICE

Make sure to remove the left swing arm before removing the casing. 

If you are finding it difficult to turn the bolts then a pair of pliers should be used. 

The pliers and crank removal tool are not a part of the assembly kit.