If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’
1. SET UP
When inserting the batteries loosen the screws, slide the monitor up and pull the clip
2. BASICS
The monitor will automatically be in ‘SCAN’ mode
Press ‘MODE’ to exit scan mode and continuously press until your chosen setting flashes
When your setting flashes then press ‘SET’ three times and the digits will start to increase
Press ‘RESET’ to return the digits to zero
3. TROUBLESHOOT
If your monitor is not displaying any readings some things to check are;
1. The wires connected during assembly are securely clipped together
2. The pins at the end of the wires are not bent in any way