The IC250 PRO provides a solid start to Indoor Cycling. Fully loaded with the most advanced features from apps to resistance, the IC250 Pro has been built to enhance your cycling performance. This bike will push you to your limits by burning calories, toning your muscles and conditioning your body.
As you exercise, the bike keeps track of the following data:
- Time: The total time you have been working out. Display time as hours: minutes.
- Speed: Your current speed, displayed in kilometres per hour (km/h).
- Distance: The total accumulated distance, in kilometres during your workout.
- Calories: The total accumulated calories burned during your workout.
- Pulse: Your current pulse rate during your workout.
- Scan Mode: Displays each function continuously one after another.
- Room Temperature can be seen by pressing “Mode” button and navigating through
Set up
When inserting the batteries make sure they are the correct way round and the pulse rate sensor wire is connected
Basics
The IC250’s monitor is spit into 5 sections. The main section displays either speed or RPM and you can navigate between these by pressing the ‘Mode’ button.
To exit scan mode press the ‘Mode’ button on the monitor, this will ensure that monitor remains displaying either Speed or RPM without alternating.
This monitor also displays room temperature, to access this, press the mode button until the display titles at the bottom start to flash. Continue to press the ‘mode’ button until you reach the “CAL” section, then press once more and this section will show “TEMP” and display the room temperature.
To reset the monitor press and hold the ‘Mode’ button until all the zero’s flash
Troubleshoot
If your monitor is not displaying any readings some things to check are:
- The wires connected during assembly are securely clipped together
- The pins at the end of the wires are nit bent in any way
If you have any further queries, please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’