If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’


1 x Pliers                                                1 x 8 mm Allen Key



1. Start by removing the handlebar post

2. Disconnect the sensor wires

3. Unhook the tension cable

4. Screw the nut under the tension cable anticlockwise down the thread

5. Screw the hook to follow the nut

6. Reconnect the tension cable

7. Reconnect the sensor wires

8. Slot the handlebar post back in place making sure not to catch the wires