If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’

1. SET UP

          

To remove the monitor push up the small clip at the bottom

When replacing the batteries make sure they are the correct way round

Remove the black tape to replace the batteries

2. BASICS

          

The monitor will automatically be in ‘SCAN’ mode

Press the single button on the monitor to exit ‘SCAN’ mode, continuously press until the arrow corresponds to the correct setting

Press and hold the single button to reset the monitor back to zero

3. TROUBLESHOOT

If your monitor is not displaying any readings some things to check are;

1. The wires behind the monitor are connected

2. The sensor underneath the slide way is attached securely