If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’ TOOLS 1 x Allen Key Is My Running Belt Loose? One way of checking is to: 1. Place your feet on either side of the treadmill 2. Set the speed […]
Technical Resolutions
S300 Monitor Adjustment Instructions
If you have any further queries please contact our customer service team on 0121 328 7507 or email at ‘contact@jllfitness.co.uk’ TOOLS 1 x Allen Key INSTRUCTIONS 1. The monitor will arrive flat packed 2. To lift the monitor push the plastic from underneath and pull it up […]
How to Replace the Belt on a JLL® JF150 Exercise Bike
How To Check the Connection Wires on a JLL® S400 Treadmill
How To Check the Connection Wires on a JLL® S300 Treadmill
How To Check the Connection Wires on a JLL® D100 Treadmill
Treadmill – Maintenance
Now that you have a treadmill or you have decided to get one, you must know that every JLL treadmill come from the factory perfectly tighten and with a perfect state of lubrication. However, you just need to follow a simple steps to maintain it. Keep the running machine in a clean state would help […]
Treadmill – How do I know if the running belt is aligned?
If the gap between the side skirts and the running belt is approximately 5-6 millimetres on both sides, this means that the belt is aligned. But if that gap has a different distance each side this means that the belt is not aligned and should put it back in the right position. If you would […]
Treadmill – The running belt jerks/ slips when I am on it.
This could be that your running belt is loose. To check this you should put your treadmill at 2-3km/h. Hold the handrails, walk on the treadmill and place one foot firmly down with your weight on the running board. If it stops and you feel a slip your Running belt is loose. For instructions on […]
Treadmill – My screen is flashing.
A flashing screen will indicate an issue with the safety key. So before starting your treadmill up please ensure the safety key is in place on the monitor. The safety key works on a magnet connection. If you have ensured the safety key is in place and your monitor is still flashing then it could […]